How Does The Automatic Terminal Machine Remove Moisture
Air conditioning dehumidification. Most air conditioners now have this function. Starting the dehumidification function of air conditioner can reasonably solve the problem of room humidity during rainy and rainy periods, and also can constitute a full-scale maintenance for automatic terminals.
Protective cover. When the factory's fully automatic terminals are not in use, it is best to make a protective cover, which effectively prevents the rear of the electrical appliances from touching damp air. At the same time, you can also increase the frequency with which these appliances are used, as the machine generates heat when it is running, which effectively dissipates moisture. If the computer is not visible due to moisture, you can turn it on and power it on, and the display will normally work again in about 10 minutes.
If the outside air is too wet, remember to close the doors and windows. If the room is excessively wet, to ensure ventilation, you can use air conditioning and fans to remove moisture.
If the wall is full of sweat, it is recommended to buy a dehumidifier for dehumidification.
In long-term wet areas, you can choose to place carbon in the room or bamboo charcoal under the floor of the room. The balance of humidity in the room and the prevention of dust fall and the purification of air play a very good role.
Put some quicklime (with sand inside) in the wetter corner.